In the industrial world where quality control becomes more important, Kelvin Research Center is proud to be able to offer a better accuracy results responding to all type of calibration i.e. Thermal, Mechanical & Electro Technical. We provides calibration services of general purpose equipments and measurement equipment from leading manufacturers such as Agilent/ Hewlett, Fluke,Tektronix, Mitutoyo, Mettler Toledo, Sartorius, Wika and more.  Our services combine high precision, innovation advanced approach and ease understanding. We are accredited to calibrate the master instruments too i.e Deadweight tester, PRT, RTD, Timer, weighing balances of least count 0.001 mg, etc.

This division offers both an on-site and an off-site calibration services at our purpose built calibration laboratory. The calibrations are carried out to traceable national standards and can be carried out to our own very rigorous procedure or to the client’s procedure. All work carried out is fully document and supplied upon completion of the works. Our professional metrologists and customer service representative assure you the highest standard of service and quality.

MEASURING INSTRUMENTS IN OUR NABL SCOPE
  ELECTRO-TECHNICAL
SR. NO. PARAMETER/INSTRUMENTS NAME MASTER USED
  ELECTRO-TECHNICAL
1 Resistance Using Fluke 5502A Multi-Product Calibrator in Source mode & Fluke 8846A 6½ Precision Multimeter in Measure Mode By Direct Method  
2 AC Current
3 AC Voltage
4 DC Voltage
5 DC Current
6 Capacitance
7 Temperature Indicators Using Fluke 5502A Multi-Product Calibrator By Direct Method
8 Temperature Simulators (Process Calibrators) Using Fluke 5502A Multi-Product Calibrator & Fluke 8846A 6½ Precision Multimeter By Direct Method
9 Inductance          Using Decade Inductance Box by Direct Method
10 AC Power Using Fluke 5502A Multi-Product Calibrator By Direct Method
11 Power Factor Using Fluke 5502A Multi-Product Calibrator By Direct Method
12 Frequency Using Fluke 5502A Multi-Product Calibrator By Direct Method
13 Stop Watch/Timer/Hour Meter Using Programmable Digital Timer by Comparison Method
14 AC High Voltage Using Fluke HV Probe with DMM by Direct Method
15 DC High Voltage Using Fluke HV Probe with DMM by Direct Method
MECHANICAL
16 Angle Plate Squareness Using Master Cylinder by Comparison Method
17 Bevel Angle Protractor Using Angle Gauge Set Comparison Method
18 Coating Thickness Gauge Using Standard Foils
19 Depth Micrometer Using Slip Gauge Set and Caliper Checker Comparison Method
20 Depth Vernier Caliper Using Slip gauge Set and Caliper Checker Comparison Method
21 Dial Bore Gauge Using Dial Calibration Tester Comparison Method
22 Dial Thickness Gauge Using Slip Gauge Set Comparison Method
23 External Micrometer Using Slip Gauge Set Comparison Method
24 Feeler Gauge Using Digital Micrometer Comparison Method
25 Height Gauge Using Caliper Checker, Slip gauge Set Comparison Method
26 Lever Type Dial Gauge Using Dial Calibration Tester and Slip Gauge Set Comparison Method
27 Plain Plug Gauges Using Comparator Stand with Dial and Slip Gauge Set
28 Plunger Type Dial Gauge Using Dial Calibration Tester Comparison Method
29 Right Angle Using Master Cylinder and Slip Gauge Set by Comparison Method
30 Setting Rod/ Length bar Using Plunger Type Dial Gauge and Slip Gauge Set
31 Sieves Using Digital Vernier Caliper Comparison Method
32 Snap Gauge/ Dial Snap Gauge Using Slip Gauge Set Comparison Method
33 Ultrasonic Thickness Gauge Using Slip Gauge Set Comparison Method
34 V-Block Using Slip Gauge Set, Master Cylinder, Mandrel Cylinder, mandrel & Plunger Type Dial Gauge
35 Vernier Caliper Using Caliper Checker and Slip Gauge Set by Comparison Method
36 Profile Projector Using Glass Scale, Angle Gauge and Digital Vernier Caliper by Comparison Method
37 Hydraulic Dead Weight Tester Using Fluke P3125- BAR Deadweight Tester By Pressure Generation Method
38 Hydraulic Pressure : Calibrator Digital/ Analog, Pressure gauges, Transducers/ Transmitters Using Fluke P3125- BAR Deadweight Tester Based on DKDR 6-1
39 Pneumatic Pressure : Digital/ Analog Pressure Gauges Transducers/ Transmitters Using Fluke Pressure Gauge by Comparison method based on DKD-R 6-1
40 Laboratory Glassware (Volumetric Instruments)- Burette, Pipette, Measuring Cylinder, Flask, Graduated Jar, Beaker Using weighing balance(s) with L.C(s) of 0.01 mg/0.1 mg and distilled water by Gravimetric method.
41 Weighing Balance Using Standard Weight(s) of E1 Class and F1 class as per OIML R 76-1:2006
42 Weights (Conventional Mass) Using Standard Weight(s) of E1 class and F1 class by Substitution Method as per OIML R 111-1
THERMAL
43 Glass Thermometer/ Dial Thermometer Using PRT Sensor with Indicator & Liquid Bath by Comparison Method
44 PRT, RTD, Thermocouple with or without Indicator/ Controller/ Recorder Using PRT Sensor with indicator & 6.5 DMM  by Comparison Method
45 Temperature Indicator with Sensor of Oven, Furnace. Using S type Thermocouple with Indicator. Single Position Calibration (At Measuring Location in DUC)
46 Temperature Indicator with Sensor of refrigerator, Bath, Chiller, deep freezer Using PRT Sensor with indicator by Comparison Method
47 Humidity Indicator with Sensor of Chamber, Environment Chamber Using Digital Humidity Meter with Sensor. Single Position (At Measuring Location in DUC)

Other Service

KRC provides repairing services of general purpose equipments such as Vernier caliper, Micrometer, Lever and Plunger dial gauges, Multimeters and more. Depending on the problem, most evaluations are performed within 5-10 business days at no charge.  Repair evaluations are sent via email for approval prior to any work being performed.

Calibration and metrology training can help you to REDUCE REJECTION RATES.
KRC really want to help you learn the foundation and techniques of metrology that you can put to immediate use in your workplace. We provide metrology training services in different parameters (Thermal, Pressure & Vacuum, Electro-Technical, Mass & Volume and Dimension.)* and industrial training too.

Our professional experts who are certified as lead auditor, auditor, internal qualified auditor for QMS, EMS, OHS, C-TPAT, IATF 16949, VAD 6.3 and more  provides expert advice. We provide IMS consultancy and Certification.

Customer Specific Requirements

MSIL

GM

SONY

SCHAEFFLER

DAIMLER

ASHOK LEYLAND

JCB

SKF

HERO HONDA

FORD

BOSCH

TIMKEN

VOLKSWAGON

NTPC

NOKIA

NRB

TATA MOTORS

MARUTI

ESCORTS

NBC

For laboratory our technical support team provides easy-access and committed services including:
– Pre-purchase consultation;

– Lab layout design proposals;
– On-site instrument installation and calibration training;
– Customized software and hardware integration;
– Consultancy for NABL accreditation as per ISO/IEC 17025: 2017.

Our Industrial Clients